PETG+ Print Service

Drop a model or a photo for real OrcaSlicer measurements on the Bambu A1 Mini. This page shows grams and print time only; Luis sends the actual quote by email after checking fit, queue, and finish details.

Part of The Workshop.
Build envelope: 180 x 180 x 180 mm. Oversize models are rejected here before upload. Email is the only contact channel for v1. No payment is taken on this page, and no automatic result is a binding job price.
Example pricing only: a sample 20 mm calibration cube might measure about 3.5 g and 29 min and price around $9.62 after setup, material, and machine-time factors. That sample is not your uploaded job; Luis will send your actual quote by email.

Choose a lane

Model print

Upload .stl, .3mf, .obj, or .step. STL and 3MF files are measured in your browser before the form will send.

  • A1 Mini fit is checked against 180 x 180 x 180 mm.
  • The backend slices a generated copy, not your original filename.

Photo lithophane

A lithophane is a thin translucent relief panel that reveals your photo when backlit, like a glowing portrait nightlight.

Backlit PETG+ relief
  • Requires exactly one JPG or PNG with a short edge of at least 600 px.
  • Choose 100 x 150 flat, 150 x 100 flat, or curved nightlight shade before submitting.
  • This path is measured automatically; Luis still sends the actual quote by email.

Object reproduction from photos

Photos do not contain real scale, so a print comes out the wrong size unless you provide a real-world dimension or a ruler or coin in frame.

  • Requires at least 6 photos; 12 around the object plus one from above is better.
  • Shiny, transparent, featureless, very dark objects, or details under about 2 mm usually do not reproduce well.
  • This path needs modeling review by email; it never shows an automatic price.
Open Print Lab

Request a quote

Choose an STL or 3MF model to measure it before upload, or choose a photo product.
Quote status will appear here.
← Kindro